Network Utility - TRENDnet 14dBi User Manual

3.4.7 Network Utility

The administrator can diagnose network connectivity via the PING utility.
Please click on Utilities -> Network Utility and follow the below setting.
Ping : This utility will help ping other devices on the network to verify connectivity. Ping utility, using ICMP

packets, detects connectivity and latency between two network nodes. As result of that, packet loss and
latency time are available in the Result field while running the PING test.
Destination IP/Domain : Enter desired domain name, i.e. www.google.com, or IP address of the

destination, and click ping button to proceed. The ping result will be shown in the Result field.
Count : By default, it's 5 and the range is from 1 to 50. It indicates number of connectivity test.

If the device is unable to receive replies for IP addresses or domain names from the outside of the local network such as the
Internet, please verify your network settings, like default Gateway and DNS settings under System > LAN.
TEW-455APBO High Power Wireless Outdoor PoE Access Point
47
User Manual