Yealink SIP-T2XP Administrator's Manual page 72

Administrator's Guide for SIP-T2xP IP Phones
3. Select the desired value from the pull-down list of Ringing Power Light Flash
4. Select the desired value from the pull-down list of Voice/Text Mail Power Light Flash.
5. Select the desired value from the pull-down list of Mute Power Light Flash.
6. Select the desired value from the pull-down list of Hold/Held Power Light Flash.
7. Select the desired value from the pull-down list of Talk/Dial Power Light On.
8. Click Confirm to accept the change.
Notification popups feature allows the IP phone to display the pop-up message when it
misses a call, forwards an incoming call to other party or receives a new voice mail or a
new text message.
Note
Notification popups feature is applicable to IP phones running firmware version 73 or
later.
Procedure
Notification popups can be configured using the configuration files or locally.
Configuration
File
Local
54
<y0000000000xx>.cfg
Web User Interface
Configure notification popups.
Parameters:
features.voice_mail_popup.enable
features.missed_call_popup.enable
features.forward_call_popup.enable
features.text_message_popup.enable
Configure notification popups.