Yealink SIP-T2XP Administrator's Manual page 416

Administrator's Guide for SIP-T2xP IP Phones
Description:
Enables or disables the voice quality data of the last call to be displayed on web
interface at path Status->RTP Status.
0-Disabled
1-Enabled
Note: It is only applicable to IP phones running firmware version 73 or later.
Web User Interface:
Settings->Voice Monitoring->Display Report options on Web
Phone User Interface:
None
phone_setting.vq_rtcpxr.states_show_on_gui.enable
Description:
Enables or disables the voice quality data of the last call or current call to be
displayed on the LCD screen. You can view the voice quality data of the last call by
pressing Menu->Status->RTP Status. You can view the voice quality data of the
current call by pressing RTP Status soft key during a call.
0-Disabled
1-Enabled
Note: It is only applicable to IP phones running firmware version 73 or later.
Web User Interface:
Settings->Voice Monitoring->Display Report options on phone
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_start_time.enable
Description:
Enables or disables the phone to display Start Time on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
"phone_setting.vq_rtcpxr.states_show_on_gui.enable" is set to "1".
Note: It is only applicable to IP phones running firmware version 73 or later.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Start Time
398
Parameters
Permitted
Default
Values
0 or 1 0
0 or 1 1