Yealink SIP-T2XP Administrator's Manual page 104
Hide thumbs
Also See for SIP-T2XP:
- Administrator's manual (506 pages) ,
- Auto provisioning manual (294 pages) ,
- Provisioning manual (294 pages)
Table of Contents
Advertisement
Administrator's Guide for SIP-T2xP IP Phones
Parameters
For SIP-T22P/T26P/T28P IP phones, the default value is 0.
For SIP-T20P IP phones, the default value is 7.
Note: "WWW" represents the abbreviation of the week, "DD" represents a two-digit
day, "MMM" represents the first three letters of the month, "YYYY" represents a
four-digit year, and "YY" represents a two-digit year which is not displayed on the
LCD screen of SIP-T20P IP phones.
Web User Interface:
Settings->Time & Date->Date Format
Phone User Interface:
Menu->Settings->Basic Settings->Time & Date->Time & Date Format->Date Format
To configure NTP by DHCP priority feature via web user interface:
1.
Click on Settings->Time & Date.
2.
Select the desired value from the pull-down list of NTP By DHCP Priority.
3.
Click Confirm to accept the change.
To configure the NTP server, time zone and DST via web user interface:
1.
Click on Settings->Time & Date.
2.
Select Disabled from the pull-down list of Manual Time.
3.
Select the desired time zone from the pull-down list of Time Zone.
4.
Enter the domain names or IP addresses in the Primary Server and Secondary
Server fields respectively.
5.
Enter the desired time interval in the Synchronism (15~86400s) field.
6.
Select the desired value from the pull-down list of Daylight Saving Time.
86
Permitted Values
Default
Advertisement
Table of Contents
