Yealink SIP-T2XP Administrator's Manual page 52

Administrator's Guide for SIP-T2xP IP Phones
Contact your ISP for the PPPoE user name and password.
Procedure
PPPoE can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
network.internet_port.type
Description:
Configures the Internet (WAN) port type for IPv4 when the IP address mode is
configured as IPv4 or IPv4&IPv6.
0-DHCP
1-PPPoE
2-Static IP Address
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4
34
<MAC>.cfg
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Parameters
Configure PPPoE on the IP phone.
Parameters:
network.internet_port.type
Configure the user name and
password for PPPoE on the IP
phone.
Parameters:
network.pppoe.user
network.pppoe.password
Configure PPPoE on the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Configure PPPoE on the IP phone.
Permitted Values
0, 1 or 2
Default
0