Yealink SIP-T2XP Administrator's Manual page 56

Administrator's Guide for SIP-T2xP IP Phones
Local
Details of Configuration Parameters:
network.internet_port.speed_duplex
Description:
Configures the transmission method and speed of the Internet (WAN) port.
0-Auto negotiate
1-Full duplex, 10Mbps
2-Full duplex, 100Mbps
3-Half duplex, 10Mbps
4-Half duplex, 100Mbps
Note: We recommend that you do not change this parameter. If you change this
parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Port Link->WAN Port Link
Phone User Interface:
None
network.pc_port.speed_duplex
Description:
Configures the transmission method and speed of the PC (LAN) port.
0-Auto negotiate
1-Full duplex, 10Mbps
2-Full duplex, 100Mbps
3-Half duplex, 10Mbps
4-Half duplex, 100Mbps
Note: We recommend that you do not change this parameter. If you change this
parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Port Link->PC Port Link
38
Web User Interface
Parameters
Configure the transmission methods
of Ethernet ports.
Navigate to:
http://<phoneIPAddress>/servlet?p=
network-adv&q=load
Permitted Values
0, 1, 2, 3 or 4
0, 1, 2, 3 or 4
Default
0
0