Yealink SIP-T2XP Administrator's Manual page 71

phone_setting.mute_power_led_flash_enable
Description:
Enables or disables the power indicator LED to flash when a call is mute.
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) green)
Web User Interface:
Features->Power LED->Mute Power Light Flash
Phone User Interface:
None
phone_setting.hold_and_held_power_led_flash_enable
Description:
Enables or disables the power indicator LED to flash when a call is placed on hold or is
held.
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) green)
Web User Interface:
Features->Power LED->Hold/Held Power Light Flash
Phone User Interface:
None
phone_setting.talk_and_dial_power_led_enable
Description:
Enables or disables the power indicator LED to be turned on when the IP phone is
busy.
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid green)
Web User Interface:
Features->Power LED->Talk/Dial Power Light On
Phone User Interface:
None
To configure the power Indicator LED via web user interface:
1. Click on Features->Power LED.
2. Select the desired value from the pull-down list of Common Power Light On.
Parameters
Configuring Basic Features
Permitted
Default
Values
0 or 1 1
0 or 1 0
0 or 1 1
53