Yealink SIP-T2XP Administrator's Manual page 122

Administrator's Guide for SIP-T2xP IP Phones
Details of Configuration Parameters:
Parameters
phone_setting.lcd_logo.mode
Description:
Configures the logo mode of the LCD screen.
0-Disabled
1-System logo
2-Custom logo
If it is set to 0 (Disabled), the IP phone is not allowed to display a logo.
If it is set to 1 (System logo), the LCD screen will display the system logo.
If it is set to 2 (Custom logo), the LCD screen will display the custom logo (you need
to upload a custom logo file to the IP phone).
Default Value:
For SIP-T26P/T22P/T20P IP phones, the default value is 0.
For SIP-T28P IP phones, the default value is 1.
Note: For SIP-T28P IP phones, valid values are 1(System logo) and 2(Custom logo).
For SIP-T20P IP phones, valid values are 0(Disabled) and 1(Enabled).
For SIP-T20P IP phones:
Enables or disables a text logo.
If it is set to 0 (Disabled), the IP phone is not allowed to display a text logo.
If it is set to 1 (Enabled), the LCD screen will display the custom text logo.
Web User Interface:
Features->General Information->Use Logo
Phone User Interface:
None
lcd_logo.url
104
?p=features-general&q=load
Permitted Values
0, 1 or 2
URL within 511
characters
Default
Refer to the following
content
Blank