Yealink SIP-T2XP Administrator's Manual page 47

Local
Details of Configuration Parameters:
Parameters
network.internet_port.type
Description:
Configures the Internet (WAN) port type for IPv4 when the IP address mode is
configured as IPv4 or IPv4&IPv6.
0-DHCP
1-PPPoE
2-Static IP Address
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4
network.ip_address_mode
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4&IPv6
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->Internet Port->Mode (IPv4/IPv6)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Web User Interface
Phone User Interface
Getting Started
Configure network parameters of
the IP phone manually.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Configure network parameters of
the IP phone manually.
Permitted Values
0, 1 or 2
0, 1 or 2
Default
0
0
29