Yealink SIP-T2XP Administrator's Manual page 61

Local Web User Interface
Details of Configuration Parameters:
Parameters
auto_provision.power_on
Description:
Enables or disables the IP phone to perform an auto provisioning process when
powered on.
0-Disabled
1-Enabled
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
auto_provision.repeat.enable
Description:
Enables or disables the IP phone to perform an auto provisioning process
repeatedly.
0-Disabled
1-Enabled
Web User Interface:
Settings->Auto provision->Repeatedly
Phone User Interface:
auto_provision.weekly.begin_time
auto_provision.weekly.end_time
auto_provision.weekly.dayofweek
Specify the access URL of firmware.
Parameter:
firmware.url
Configure the way for the IP phone to
check for configuration files.
Navigate to:
http://<phoneIPAddress>/servlet?p=s
ettings-autop&q=load
Permitted Values
0 or 1
0 or 1
Getting Started
Default
1
0
43