Yealink SIP-T2XP Administrator's Manual page 522

Hide thumbs Also See for SIP-T2XP:

Table of Contents

Administrator's Guide for SIP-T2xP IP Phones

To reset the IP phone via web user interface:

Click on Settings->Upgrade.

Click Reset to Factory Reset in the Reset to Factory Setting field.

The web user interface prompts the message "Do you want to reset to factory?".

Click OK to confirm the resetting.

The IP phone will be reset to factory sucessfully after startup.

Reset of your phone may take a few minutes. Do not power off until the phone starts up

successfully.

Factory reset can restore the original password. All custom settings will be overwritten

after reset.