Yealink SIP-T2XP Administrator's Manual page 342

Administrator's Guide for SIP-T2xP IP Phones
Details of Configuration Parameters:
multicast.listen_address.X.ip_address
(X ranges from 1 to 10)
Description:
Configures the multicast address and port number that the IP phone listens to.
Example:
multicast.listen_address.1.ip_address = 224.5.6.20:10008
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Web User Interface:
Directory->Multicast IP->Listening Address
Phone User Interface:
None
multicast.listen_address.X.label
(X ranges from 1 to 10)
Description:
Configures the label to be displayed on the LCD screen when receiving the RTP
multicast.
Example:
multicast.listen_address.1.label = Paging1
Web User Interface:
Directory->Multicast IP->Label
Phone User Interface:
None
multicast.receive_priority.enable
Description:
Enables or disables the IP phone to handle the incoming multicast paging calls
when there is an active multicast paging call on the IP phone.
0-Disabled
324
Parameters
Configure Paging Barge and Paging
Priority Active features.
Navigate to:
http://<phoneIPAddress>/servlet?p=c
ontacts-multicastIP&q=load
Permitted Values
IP address: port
String within 99
characters
0 or 1
Default
Blank
Blank
1