Yealink SIP-T2XP Administrator's Manual page 415

phone_setting.vq_rtcpxr_delay_threshold_warning
Description:
Configures the threshold value of one way delay (in ms) that causes the phone to
send a warning alert quality report to the central report collector.
For example, If it is set to 500, when the value of one way delay computed by the
phone is less than or equal to 500, the phone will send a waring alert quality report
to the central report collector; when the value of one way delay computed by the
phone is greater than 500, the phone will not send a warning alert quality report to
the central report collector.
If it is set to blank, warning alerts are not generated due to one way delay. One-way
delay includes both network delay and end system delay.
Note: It is only applicable to IP phones running firmware version 73 or later.
Web User Interface:
Settings->Voice Monitoring->Warning threshold for Delay
Phone User Interface:
None
phone_setting.vq_rtcpxr_delay_threshold_critical
Description:
Configures the threshold value of one way delay (in ms) that causes phone to send
a critical alert quality report to the central report collector.
For example, If it is set to 500, when the value of one way delay computed by the
phone is less than or equal to 500, the phone will send a critical alert quality report to
the central report collector; when the value of one way delay computed by the
phone is greater than 500, the phone will not send a critical alert quality report to the
central report collector.
If it is set to blank, critical alerts are not generated due to one way delay. One-way
delay includes both network delay and end system delay.
Note: It is only applicable to IP phones running firmware version 73 or later.
Web User Interface:
Settings->Voice Monitoring->Critical threshold for Delay
Phone User Interface:
None
phone_setting.vq_rtcpxr.states_show_on_web.enable
Parameters
Configuring Advanced Features
Permitted
Values
10 to 2000
10 to 2000
0 or 1
Default
Blank
Blank
0
397