Security; Password; Hide 802.11 Password; Ip Config - AJA Ki Pro Quick Start Manual

72

53.3 802.11 SECURITY

53.4 802.11 PASSWORD

54.1 HIDE 802.11 PASSWORD

54.1 802.11 IP CONFIG

53.3 802.11 SECURITY
This parameter defines the type of security (encryption/format) used between Ki Pro,
the access point and wireless browser clients—if any.
DISABLED (default)
WEP
WPA
WPA2
53.4 802.11 PASSWORD
This parameter defines the password used between Ki Pro, the access point and
wireless browser clients—if any.
variable
53.5 HIDE 802.11 PASSWORD
This parameter determines whether the password set in 53.4 is visible from the front
panel or Web browser user interfaces.
ON
OFF (default)
Note: if you choose to hide the password (ON setting) and then switch the parameter back to
OFF, then the password will not be displayed. In order to see it again, you would need to
re-enter it.
54.1 802.11 IP CONFIG
This parameter determines the type of TCP/IP network configuration used by Ki Pro's
wireless 802.11 transceiver.
Note: There is no timeout when editing—changes made will be saved and activated when
the menu is exited.
DHCP (default)
STATIC ADDR
No security employed. No password needed
Use WEP packet and stream encryption
Use WPA packet and stream encryption
Use WPA2 packet and stream encryption
Note: WEP is an entry level encryption, with WPA being
better and WPA2 the best of the three.
Using the adjust buttons, enter a password for Ki Pro.
Using the adjust buttons and the top Select button, select
the characters for the password. The adjust buttons scroll
through the choices and the top Select button advances
to the next character. While selecting characters, the
character being changed will flash to show its position.
The character set allowed is: 0 through 9, '-','.', A through
Z (uppercase) and a through z (lowercase).
Maximum password length is 20 characters.
Hide password (show characters as asterisks)
Display password.
Select automatic IP address assignment from DHCP
server in access point.
Assign a static IP address manually (parameters 54.2
and 54.3 will have to be entered to accomplish this).