Wireless Screen - AJA Ki Pro Quick Start Manual

90

Wireless Screen

The Wireless screen enables or disables wireless connections to Ki Pro via a LAN
wireless access point, allowing you wireless browser control of Ki Pro. You will see
different controls depending on whether wireless access has been enabled or
disabled.
Ki Pro Web Interface, Wireless Screen
802.11 Connection Status: shows the status of connection (connected or not
connected)
KiPro 802.11 Control (53.1): this parameter determines whether Ki Pro can be
controlled remotely from a wireless browser. Enabling wireless control turns on
the internal 802.11 radio. Parameters 53.2 through 53.5 must be set correctly to
configure Ki Pro so it can be controlled. Ki Pro wireless control also requires the
presence of wireless access point on the local LAN that it can communicate with.
Note: Although Ki Pro has an internal 802.11 transceiver, it is not a wireless access
point. Wireless browser clients talk to Ki Pro via an external wireless access point
(such an Airport Extreme base station).
Warning!
Do not touch the Ki Pro radio or antenna cover when the antenna is
transmitting or receiving.
Warning!
Install this device in such a manner as to maintain a minimum of 5 cm (2
inches) separation distance between the radiating element(s) and all
persons. This safety warning conforms with FCC radio frequency exposure
limits.