Video Sg Frmt; Video Sg; Audio Sg - AJA Ki Pro Quick Start Manual

41.1 VIDEO SG FRMT

41.2 VIDEO SG

41.3 AUDIO SG

Ki Pro Installation and Operation Manual — CONFIG menus
41.1 VIDEO SG FRMT
This parameter determines the video format output from Ki Pro's internal test signal
generator. This parameter is used with parameter 41.2 to determine the type of video
test signal output by Ki Pro.
525i 29.97 (default)
625i 25
720p 50
720p 59.94
1080p 23.98
1080i 25
1080i 29.97
720p 60
1080PsF 23.98
1080PsF 24
1080i 30
1080p 24
1080p 25
1080p 29.97
41.2 VIDEO SG
This parameter determines the video signal output from Ki Pro's internal test signal
generator. This parameter is used with parameter 41.1 to determine the type of video
test signal output by Ki Pro.
OFF (default)
Black
75% Bars
100% Bars
41.3 AUDIO SG
This parameter determines the audio signal output from Ki Pro's internal test signal
generator.
OFF (default)
Silence
1 kHz
Select the video format desired for test signal output.
Turn test signal output OFF.
Video test signal output is color black.
Video test signal output is 75% color bars. This 75%
amplitude,100% saturation test signal is useful to check
low frequency response and video tilt as well as the
performance of video clamping.
Video test signal output is 100% color bars. This 100%
white full field bars test signal is helpful to check chroma
amplitude versus overall video level.
Turn audio test signal output OFF.
Output an audio test signal containing silence only.
Output a standard 1 kHz test signal tone.
67
1