When Using An Iphone To Control Ki Pro; Status - AJA Ki Pro Quick Start Manual

98

When Using an iPhone to Control Ki Pro

• Be sure that your iPhone or iPod touch is updated to the latest version of
software. If you do not use the most recent software for these devices, you may
experience less than optimal interaction with the Ki Pro wireless UI including,
but not limited to inability to use the transport buttons to operate the device.
• You can add the Ki Pro web control to your iPhone Home Screen by pushing the
"+" button, then "Add to Home Screen". Hints: Before adding the Ki Pro to the
Home Screen, open the Transport portion of the UI on the phone. The icon
created on the Home Screen will then look like the Ki Pro's front panel. To see all
of the buttons as they appear on the front of the Ki Pro in the iPhone UI, turn the
iPhone to landscape mode in the Transport menu and you will then see the
SELECT up/down. ADJUST up/down, DELETE CLIP and SLOT buttons.

Status

The Status screen is the entry point to the iPhone menus and provides access to the
other menus. This iPhone screen displays the following controls and values:
• Buttons to access the other menus: Status, Config, Media, Alarms, Playlists,
Transport.
• I/O status including video input source, input format, input timecode, record
format, and audio input source.
Ki Pro iPhone Interface, Status Screen