Recalling Presets - AJA Ki Pro Quick Start Manual

109
Ki Pro Installation and Operation Manual — Advanced Features
To customize presets, you may click on the second column of text fields and name the
preset.
1
After you have entered a name for the preset, press Enter.
The preset is not stored until you save it. Important: be sure that you have made all of
the parameter settings you want for a particular preset before you save it. By default, all
parameters are stored and recalled.

Recalling Presets

To recall a preset, select the Recall button in the row assocated with the desired preset.
You can also export a preset file to your computer or import a preset file from your
computer. Note: AJA recommends that presets only be used between the same types
of devices. In other words, only use presets from Ki Pros with other Ki Pros, not with Ki
Pro Minis.
At any time you may perform a recall of the Factory Settings if you have presets
enabled. Important: presets do survive reboots of the device. If you want to be sure
that your device does not have someone else's settings in place, you can perform a
recall of Factory Settings prior to configuring and working with the Ki Pro.
While the web UI is the preferred method of working with presets, they may also be
saved and recalled from the front panel UI. Important: custom naming of presets is
not possible from the front panel UI; presets will have their default names of "Preset 1, "
Preset 2, " etc. To recall a preset from the front panel UI, navigate to CONFIG menu
parameter 91.1 Recall Preset. Use the ADJUST up/down buttons to select a preset. Use
the SELECT up button to choose a specific preset and the ADJUST up button to recall
the preset. To abort recalling a preset, press the select down button.