Removing Devices From Drive Bays - NEC Versa 2400 Series User Manual

T
Diskette Drive Bay — Your system ships with a stan-
dard 3.5-inch 1.44-MB diskette drive already installed in
the front-most side bay. You can remove the diskette
drive and install an optional second battery pack into
this bay.
T
Hard Disk Drive Bay — The side bay closest to the
back of the system contains the hard disk drive. PC Card
slots are located directly above the hard disk drive bay.

Removing Devices from Drive Bays

Use the following steps to remove the diskette drive (or
other device) from the drive bay.
1. Make sure the NEC Versa is powered off, all external
options are disconnected, and the LCD panel is closed.
Turn the system upside down.
2.
Locate the bay release latches on the bottom of the
3.
unit. Each latch releases the component installed in its
associated bay.
4-10 Using Your NEC Versa
Bay release latches