NEC Versa 2400 Series User Manual page 94

Open the port cover on the back of the system.
2.
Attach the 15-pin cable connector to the monitor port on
3.
the system. Secure the cable connection with the screws
provided.
Connect the monitor power cable and plug it into a
4.
properly grounded wall outlet.
Follow any setup instructions in the monitor's user's
5.
guide.
Turn on power to the monitor.
6.
7. Power on the NEC Versa.
Press the
tween the LCD, CRT, or simultaneous display on both.
4-30 Using Your NEC Versa
function key combination to toggle be-
Fn-F10
Connecting a monitor