Table of Contents
Advertisement
Power Management Settings
The system arrives set up with many power-saving features
already enabled. You can change the timeout period for
these devices using Setup. See the following table.
Automatic Power-Saving Features
Device
Standby Timeout
Auto Suspend Timeout
Hard Disk Timeout
Video Timeout
settings under Windows override the settings estab-
lished in Setup. Make the Windows 95 power saving
settings match those in Setup for the best results.
Using Fn-Esc
Press the
when you need to be away from your system for a short pe-
riod of time and want to return to where you left off. Press
the key combination again to bring the NEC Versa out of
Suspend mode.
Default
Timeout
Comment
2 minutes
System enters Standby mode after total
system inactivity.
2 minutes
This settings specifies how long the
system remains in Standby mode before
entering Suspend mode.
2 minutes
Hard disk motor stops when hard disk is
not accessed for specified timeout.
2 minutes
The video screen shuts off after the
timeout specified elapses.
NOTE
In Windows 95 systems, power management
to put the NEC Versa into Suspend mode
Fn-Esc
Using Setup and Power Management 3-11
Advertisement
Table of Contents
