Table of Contents
Advertisement
Do not cover or place objects on the AC adapter.
Doing so can cause the adapter to overheat.
Powering On
To power on, locate the power button on the side of the
system and push it in. To power off the system, push the
power button a second time.
Using the Main Battery Pack
The NEC Versa 2400 Series system comes with a recharge-
able nickel metal-hydride (NiMH) battery pack. You can
run your system on battery power for up to 4 hours with 2
batteries installed and power management features enabled.
Battery packs are easy to install and remove.
NOTE
factory, transit and shelf time may reduce the initial
battery charge. We recommend that the first time
you use your system, you connect it to AC power
using the AC adapter. This will also recharge your
battery.
Your NEC Versa 2400 Series system provides two tools to
help you keep track of the main (or an optional) battery's
power level. These include the status LEDs described ear-
lier in this chapter, and the Battery Gauge utility. Both let
you know how much battery power remains. See Chapter 2,
"Introducing the Software," for more details on using the
Battery Gauge utility.
1-14 Getting Started
!
WARNING
Although the battery is fully charged at the
Advertisement
Table of Contents
