Table 15 Gvc3200 Conference Member Status Descriptions - Grandstream Networks GVC3200 User Manual

The operations toolbar on the bottom of the video conference screen will be automatically hidden if there
is no operation in 5 seconds. Press any key to bring up the toolbar again.
INVITE MEMBERS TO CONFERENCE
Users could use one of the following ways to add members.

Access the dial screen by clicking on the ADD icon
number to dial out. Once the member answers the call, it will be connected into the conference
automatically.

When GVC3200 is on conference screen, press
Then enter the number to dial out. Once the member answers the call, it will be connected into the
conference automatically.

The member calls the conference number. If the host answers the call, the member will join
conference automatically.
REMOVING MEMBER FROM CONFERENCE
To remove a member from the conference, click on the DELETE icon
the member from the member list and press the "OK" key to delete it.
CONFERENCE CONTROL
Tap on to make operations like mute, disable sound, camera control and suspend video. The
conference control screen is as shown below.
Firmware Version 1.0.1.5

Table 15 GVC3200 Conference Member Status Descriptions

Icons Descriptions
The current line is in an audio call.
The current line is in a video call.
The current line is being muted.
The current line is not connected.
GVC3200 User Guide
on conference screen. Then enter the
on the remote control to access the call screen.
on conference screen. Select
Page 57 of 103