OLED SCREEN
OLED Screen Status
Booting
IP
Call Status
Upgrade Status
Sleep Mode
Abnormal Status
USING THE LED INDICATOR
The GVC3200 LED indicator is located next to the OLED. It can be used to notify the users with current
status of the device. Please refer to the status description below.
LED Indicator Status
Solid Green
Flash Red
Solid Red
Green Flashing once
OFF
STATUS ICONS
The GVC3200 status icons are displayed on the right side of top status bar on the GVC3200 LCD display
device.
Firmware Version 1.0.0.X
Table 7 GVC3200 OLED Screen Status Descriptions
Descriptions
Display "BOOTING..." when the GVC3200 boots up.
Display GVC3200 IP address. For example, IP: 192.168.40.5.
Display "Ringing", "Calling", "Talking", "Call Waiting", "Missed
Call", "New Voicemail" and etc.
Display "New Version, Pls Reboot" when a new firmware
version is detected.
Display "Upgrading" in the process of upgrading.
Display failure reason when upgrade fails. For example,
"Incompatible
Hardware",
Version", etc.
Display "Standby".
Display abnormal status information. The hexadecimal error code
will be displayed next to the abnormal status.
Table 8 GVC3200 LED Indicator Status Descriptions
Descriptions
Booting or the device is already booted up
Standby (Sleep Mode)
Shut down but powered on (power adapter is connected)
Key pressing on the remote control
Power off
Table 9 GVC3200 Status Icons Descriptions
GVC3200 User Guide
"Insufficient
Space",
"Same
Page 23 of 86