Table 21 Gvc3200 Web Ui - Audio Control Parameters; Figure 56 Gvc3200 Web Ui - Video Control - Grandstream Networks GVC3200 User Manual

AUDIO CONTROL
Parameters Descriptions
Ringtone Volume Users can slide left or right to adjust ringtone volume.
Media Volume Users can slide left or right to adjust media volume.
Notifications
Users can slide left or right to adjust notifications volume.
Volume
Using these settings, users can configure ring or tone frequencies based on
parameters from the local telecom provider. By default, they are set to the North
American standard.
Frequencies should be configured with known values to avoid uncomfortable high
pitch sounds.
Syntax: f1=val, f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
Dial Tone
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in 'ms') while OFF is the period of silence. In
order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms and
a pause of OFF ms and then repeat the pattern. Up to three cadences are
supported.
The default value: f1=350@-13,f2=350@-13,c=0/0
Firmware Version 1.0.1.5

Figure 56 GVC3200 Web UI - Video Control

Table 21 GVC3200 Web UI - Audio Control Parameters

GVC3200 User Guide Page 100 of 103