Grandstream Networks GVC3200 User Manual page 25

Presentation
Send/Answer/Add
Party Into Conference
End Call/Remove Party
From Conference
Backspace
Navigation Keys:
Up/Down/Left/Right
Power On/Off
Firmware Version 1.0.1.5








Press the key to delete input characters.



OK

LCD prompt shows the following three options upon pressing
this key:





*/Record


GVC3200 User Guide
Enable/disable presentation function to send presentation
to all members in the conference.
Enable/disable presentation function to show presentation
on displayer device which is connected to HDMI output 1
as projection when the GVC is in standby mode.
Access the dial screen by default when GVC is in idle
mode.
Enter phone number and press the key to dial out.
Access the invite screen to add members in a conference.
Press the key to bring out the backstage conference.
Delete members in conference.
Hang up the conference.
Adjust cursor movement.
Control PTZ movement in camera mode.
Confirm operations.
Bring up the soft keypad when the cursor is in an input
box.
Put the GXV3200 into sleep mode.
Power Off.
Reboot.
Input * in input field.
Used as "." when dialing direct IP call.
e.g., 192.168.40.5.
Start/stop recording in camera control mode.
Start/stop recording in a call.
Page 24 of 103