Layer 3 QoS for
This field defines the layer 3 QoS parameter for video packets. It is the value
Video
used for IP Precedence, Diff-Serv or MPLS. The Default value is 48;
802.1X MODE
Access GVC3200 home screen, go to Applications ->Settings ->Network->802.1X Mode. By default
802.1X is disabled. Selecting 802.1X mode to "EAP-MD5", "EAP-TLS5" or "EAP-PEAP" to turn on 802.1X.
Once enabled, the user will be required to enter the identity and Password to be authenticated in the
network.
Parameters
Descriptions
Allows the user to enable/disable 802.1X and configure 802.1X mode. The
802.1x Mode
default setting is disabled.
Identity
Enter the Identity information for the 802.1X mode.
MD5 Password
Enter the MD5 Password for the 802.1X mode.
CA Certificate
Upload the CA certificate for the 802.1X mode.
Client Certificate
Upload the CA certificate for the 802.1X mode.
Private Key
Upload the private key for the 802.1X mode.
Firmware Version 1.0.1.5
Table 13 GVC3200 802.1X Mode Parameters
GVC3200 User Guide
Page 39 of 103