Installing The Cover; Connecting The Cables - IBM System x3610 User Manual

Installing the cover

To install the cover, place it into position and slide it forward; then, tighten the
cover-release thumbscrews.

Connecting the cables

The following illustrations show the locations of the input and output connectors on
the front and rear of the server.
Front view
Rear view
You must turn off the server before you connect or disconnect cables from the
server.
40
IBM System x3610 Type 7942: User's Guide
Power-cord Mouse
Serial
connector connector
connector
Keyboard
connector
Cover release
thumb screws
3 0
4 1
5 2
Ethernet
Video
connector 1
connector
USB
System-management
connector 1
Ethernet connector
USB
connector 2
USB 6 USB 5
connector connector
Ethernet
connector 2
USB
connector 3
USB
connector 4