IBM System x3610 User Manual page 74

3. Follow the prompts to complete the installation.
To install the OSA SMBridge management utility program on a server running a
Linux operating system, complete the following steps. You must be logged in as a
root user to perform these procedures.
1. Go to http://www.ibm.com/systems/support/. Download the utility program and
2. Insert the OSA BMC Management Utility CD into the drive.
3. Type mount/mnt/cdrom.
4. Locate the directory where the installation RPM package is located and type
5. Type the following command to run the RPM package and start the installation:
6. Follow the prompts to complete the installation. When the installation is
60
IBM System x3610 Type 7942: User's Guide
The installation program prompts you for a TCP/IP port number and an IP
address. Specify an IP address, if you want to limit the connection requests that
will be accepted by the utility program. To accept connections from any server,
type INADDR_ANY as the IP address. Also specify the port number that the utility
program will use. These values will be recorded in the smbridge.cfg file for the
automatic startup of the utility program.
create the OSA BMC Management Utility CD.
cd/mnt/cdrom.
rpm -I've smbridge-2.0-xx.rpm
where xx is the release level being installed.
complete, the utility copies files to the following directories:
/etc/init.d/SMBridge
/etc/smbridge.cfg
/usr/sbin/smbridged
/var/log/smbridge/Liscense.txt
/var/log/smbridge/Readme.txt