IBM System x3610 User Manual page 44

4. Remove the air duct (see "Removing the air duct" on page 22).
5. Remove the air-baffle insert from the air duct:
6. Locate the second microprocessor connector on the system board.
7. Install the microprocessor:
30
IBM System x3610 Type 7942: User's Guide
a. From the top of the air duct, push the tabs of the air-baffle insert toward the
rear of the air duct until they are free from the slots in the air duct.
b. Push the air-baffle insert down and out of the air duct.
a. Touch the static-protective package that contains the microprocessor to any
unpainted metal surface on the server. Then, remove the microprocessor
from the package.
Microprocessor
release lever
b. Remove the protective dust cover, tape, or label from the surface of the
microprocessor socket, if one is present.
c. Rotate the microprocessor release lever on the socket from its closed and
locked position until it stops in the fully open position.
d. Lift the microprocessor bracket frame to the open position.
Microprocessor socket
dust cover
Microprocessor
bracket frame