Grandstream Networks GXV3275 Administration Manual page 84

ESSID
Password
802.1x Mode
802.1x Mode 1
802.1x Mode 2
802.1x Identity
802.1x Secret
CA Certificate
Client Certificate
Firmware Version 1.0.3.46
It is used to fill in the ESSID of the selected WiFi network. It can be
auto filled by clicking the Select button on the web page.
It is used to fill in the password for the selected WiFi network.
It is used to enable and select the 1
system. The supported 802.1x modes are :

TLS

PEAP

TTLS

PWD
The default setting is "Disable".
It is used to enable and select the 2
system if the TLS, PEAP or TTLS is selected in the 802.1x Mode 1.
The supported 802.1x mode 2 are :

PAP

MSCHAP

MSCHAPV2

GTC
It is used to fill in the identity information for the selected 802.1x mode.
(This setting will be displayed only if 802.1 X mode is enabled).
It is used to fill in the password for the selected 802.1x mode. (This
setting will be displayed only if the 802.1 X mode is enabled).
It is used to upload the CA Certificate file to the phone.(This setting will
be displayed only if the 802.1 X mode is enabled)
It is used to load the Client Certificate file to the phone. (This setting
will be displayed only if the 802.1 X TLS mode is enabled)
GXV3275 Administration Guide
st
802.1x mode for the phone
nd 802.1x mode for the phone
Page 82 of 117