Grandstream Networks GXV3275 Administration Manual page 97

LDAP Mail Filter
LDAP Displaying Name
Attributes
Max Hits
Search Timeout (ms)
LDAP Lookup For Dial
LDAP Lookup For Incoming
Call
LDAP Dialing Default Account
Note:
For more information on how to configure LDAP on GXV3275, please refer to the GXV3275 LDAP
Configuration Guide in the following link:
http://www.grandstream.com/products/gxv_series/gxv3275/documents/gxv3275_ldap_book_guide.pdf
Firmware Version 1.0.3.46
Examples:
(|(telephoneNumber=%)(Mobile=%) returns all records which has the
"telephoneNumber" or "Mobile" field starting with the entered prefix;
(&(telephoneNumber=%) (cn=*)) returns all the records with the
"telephoneNumber" field starting with the entered prefix and "cn" field
set.
It is used to configure the filter used for mail lookups.
Example:
(mail=%)
It is used to configure the entry information to be shown on phone's
LCD. Up to 3 fields can be displayed.
Example:
%cn %sn %telephoneNumber
It is used to configure the maximum number of results to be returned
by the LDAP server. If set to 0, server will return all search results. The
default setting is 50.
It is used to configure the interval (in seconds) for the server to process
the request and client waits for server to return. The default setting is
4000 seconds.
It is used to set if allow the phone system to do the LDAP number
searching when making outgoing calls. The default setting is "No".
It is used to set if allow the phone system to do LDAP number searching
for incoming calls. The default setting is "No".
This is used to configure the default account that being used when
dialing LDAP contact. Users may choose the Account 1-6, the default
setting is "Default".
GXV3275 Administration Guide Page 95 of 117