Value Range
Default Value
Web User Interface Reference
SHARED_CALL_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CALLPARK_SUBSCRIBE_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2014-05
•
Y (Enable dial plan filtering)
•
N (Disable dial plan filtering)
Note
•
If set to "Y", the dialed number will not be sent to the line when
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
•
If set to "N", the dialed number will be sent to the line, even if
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
Y
Call Even If Dial Plan Does Not Match (Page 133)
Boolean
Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both "SHARED_CALL_ENABLE" and
"FEATURE_KEY_SYNCHRO_ENABLE" to "Y" at the same time.
•
Availability depends on your phone system.
•
Y (Enable shared call)
•
N (Disable shared call)
Note
•
If set to "Y", the SIP server will control the line by using a
shared-call signaling method.
•
If set to "N", the SIP server will control the line by using a
standard signaling method.
N
Enable Shared Call (Page 131)
Boolean
Specifies whether to enable callpark event subscription after
registering.
•
Y (Enable callpark subscription)
•
N (Disable callpark subscription)
N
Call Park Subscribe Enable (Page 140)
5.7.2 Per Line - Call Control Settings
Administrator Guide
291