4.3.2.2 Static Settings
Static IP Address
Description
Value Range
Default Value
Phone User Interface
Reference
Subnet Mask
Description
Value Range
Default Value
Phone User Interface
Reference
Default Gateway
Description
Value Range
Default Value
Phone User Interface
Reference
Document Version 2014-05
Specifies the IP address of the unit.
Note
•
This setting is available only when [Connection Mode] is set
to [Static].
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Not stored.
Configuring the Network Settings of the Unit (Page 25)
Specifies the subnet mask of the unit.
Note
•
This setting is available only when [Connection Mode] is set
to [Static].
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Not stored.
Configuring the Network Settings of the Unit (Page 25)
Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
•
This setting is available only when [Connection Mode] is set
to [Static].
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Not stored.
Configuring the Network Settings of the Unit (Page 25)
4.3.2 IPv4 Network Settings
Administrator Guide
85