General Information On The Configuration Files; Configuration File Parameters - Panasonic KX-UTG200 Administrator's Manual

Category
SSH Settings
Category
SSH Settings

5.2 General Information on the Configuration Files

5.2.1 Configuration File Parameters

The information on each parameter that can be written in a configuration file is shown in the tables below. The
information includes parameter name (as the title of the table), value format, description, permitted value range,
default value of each parameter, phone user interface reference, and Web user interface reference.
Note
•
Configuration file templates and other information about configuration files are provided at the
Panasonic website:
http://www.panasonic.com/sip
Parameter Name
This is the system-predefined parameter name and cannot be changed.
Value Format
Each parameter value is categorized into Integer, Boolean, or String. Some parameters require a composite
form such as "Comma-separated Integer" or "Comma-separated String".
•
Integer: a numerical value, described as a sequence of numerical characters, optionally preceded by a
"-" (minus)
An empty string is not allowed.
•
Boolean: "Y" or "N"
•
String: sequence of alphanumerical characters
Document Version 2014-05
Parameter Name
SIP_403_REG_SUB_RTX
SIP_DUAL_STACK_SDP_MODE
AUTH_INCOMING_INVITE
SIP_RINGIN_TIMER
SIP_2NDPROXY_ADDR
SIP_2NDPROXY_PORT
SIP_2NDRGSTR_ADDR
SIP_2NDRGSTR_PORT
Parameter Name
SSH_USER_NAME
SSH_PASSWORD
SSH_ACCESS_DISABLE
5.2.1 Configuration File Parameters
Page 313
Page 314
Page 314
Page 314
Page 314
Page 315
Page 315
Page 315
Page 315
Page 315
Page 316
Administrator Guide
Ref.
Ref.
217