Usr_Prov_Svr_Auth_Id; Usr_Prov_Svr_Auth_Password; Cfg_Root_Certificate_Path1 - Panasonic KX-UTG200 Administrator's Manual

Default Value
Web User Interface Reference

USR_PROV_SVR_AUTH_ID

Value Format
Description
Value Range
Default Value
Web User Interface Reference

USR_PROV_SVR_AUTH_PASSWORD

Value Format
Description
Value Range
Default Value
Web User Interface Reference

CFG_ROOT_CERTIFICATE_PATH1

Value Format
Description
Value Range
Default Value
Document Version 2014-05
Empty string
Provision Server (Page 173)
String
Specifies the authentication ID used to access the provisioning server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Empty string
Authentication ID (Page 174)
String
Specifies the authentication password used to access the provisioning
server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Empty string
Authentication Password (Page 174)
String
Specifies the URL of the root certificate. When this parameter is
specified, the Embedded root certificate is ignored. This setting should
only be placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Max. 1024 characters
Empty string
5.3.6 Provisioning Settings
Administrator Guide 237