Description
Value Range
Default Value
Web User Interface Reference
ENDCALL_TRANSFER_ENABLE
Value Format
Description
Value Range
Default Value
FOLLOW_SERVER_BELLCORE
Value Format
Description
Value Range
Default Value
BUSY_ON_CALL_END
Value Format
Description
Value Range
Default Value
REORDER_TONE_TIM
Value Format
Description
Document Version 2014-05
Selects whether a tone is heard in response to key presses.
0–3
–
0: high
–
1: middle
–
2: low
–
3: off
3
Key Click Tone (Page 151)
Boolean
Specifies if users can press the end call soft key to complete the
transfer.
•
Y (Enable End call transfer)
•
N (Disable End call transfer)
N
Boolean
Specifies whether to follow server bell core requests.
•
Y (Follow server bell core request)
•
N (Do not follow server bell core request)
Y
Boolean
Specifies whether the unit should play a busy tone when the remote
party ends the call while the call is connected.
•
Y (Enable busy on call end)
•
N (Disable busy on call end)
Y
Integer
Specifies the duration of the reorder tone.
5.5.1 Call Control Settings
Administrator Guide
257