Panasonic KX-UTG200 Administrator's Manual page 255

INTDIGIT_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
MACRODIGIT_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
INTERNATIONAL_ACCESS_CODE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
COUNTRY_CALLING_CODE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2014-05
Integer
Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
1–15
5
Inter-digit Timeout (Page 127)
Integer
Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
1–15
5
Timer for Dial Plan (Page 127)
String
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters (consisting of 0–9, *, and #)
Note
•
No other characters are allowed.
Empty string ("+" is deleted)
International Call Prefix (Page 128)
String
Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Max. 8 characters (consisting of 0–9)
Empty string
Country Calling Code (Page 128)
5.5.1 Call Control Settings
Administrator Guide 255