Kem_Upgrade_Auto; Firmware Update Settings; Firm_Upgrade_Enable - Panasonic KX-UTG200 Administrator's Manual

Value Range
Default Value

KEM_UPGRADE_AUTO

Value Format
Description
Value Range
Default Value

5.3.5 Firmware Update Settings

FIRM_UPGRADE_ENABLE

Value Format
Description
Document Version 2014-05
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with
"FIRM_VERSION" depending on the system. Note that this rule
differs from other parameters such as "SIP_USER_AGENT".
Empty string
Boolean
Specifies whether to display a confirmation message asking the user
to perform a KEM update (manual) or perform the KEM update without
asking the user (automatic) when the unit detects a newer version of
KEM.
•
Y (Enable automatic KEM update)
•
N (Disable automatic KEM update)
Y
Boolean
Specifies whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
•
Changing this setting may require restarting the unit.
•
Local firmware updates from the Web user interface (® see
4.8.4 Local Firmware Update) can be performed regardless
of this setting.
5.3.5 Firmware Update Settings
Administrator Guide 227