Counting; Prepare To Start Counting - A&D GC Series Instruction Manual

9.

Counting

9.1. Prepare to Start Counting

For counting, the weight per one item (unit weight) needs to be set.
1. Press the ON/OFF
operation.
2. Three LED lights in the unit weight panel blink and the unit weight setting is activated. This is the default
status before counting.
3. Choose one of the following options to set the unit weight for counting, or bring up one from the memory.
Press the
suspend the operation or are uncertain about the ongoing operation. This
does not clear the tare weight, total count, upper limit/lower limit of
comparator.
key to turn on the display. Or press the
RESET key to return to the default status above whenever you
RESET
9.4. Unit Weight by Sample
Set with ten samples
Set with the desired number of samples
9.5. Unit Weight by Keyboard
9.6. Unit Weight by ID Number
15
key to initialize the previous