Aligning The Text; Inserting Punctuation; Inserting Symbols; Inserting International Characters - Dymo XTL 500 User Manual

Aligning the Text

The text on your label can be aligned left, center, or right, vertically and
horizontally.
Align
left
To align the text
Select a text box.
1
Tap and .
2
Or, on the keypad, press
The Text Alignment tool appears.
Tap an alignment.
3

Inserting Punctuation

Punctuation characters can be inserted on your label. Once inserted, the
character is treated the same as any other text.
Refer to Symbols on page 54 for the complete list of punctuation characters
available.
To insert a punctuation
Press + any numeric key.
1
The Symbols tool appears.
Tap a character to insert that character on the label.
2
The currently selected character is inserted at the cursor position and the
Symbols tool disappears after a few seconds.

Inserting Symbols

Fractions and other symbols can be inserted on your label. Once inserted, the
symbol becomes a character and is treated the same as text. You can apply bold
and underline to most symbols.
Refer to Symbols on page 54 for the complete list of symbols available.
To insert a symbol
From the edit screen, tap
1
Tap Symbol and a category.
2
Tap the desired symbol to add it to the label at the cursor position.
3
Symbols can also be inserted from the Symbols tool as described in Inserting
Punctuation above.

Inserting International Characters

The label maker supports the extended Latin character set. Similar to using a
mobile phone, holding down a letter key will display all the variations of that letter.
™
29 XTL 500
User Guide
Align Align Align Align
center right top middle
+ .
.
Align
bottom