110-Block Label - Dymo XTL 500 User Manual

One text object is automatically added to the label. You can add additional text
box, barcode, image, or shape objects to heat-shrink tube labels.
Text size and style apply to the currently selected text. If no text is selected, the
size and style apply to all the text in the text box.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 35.
The following table should help in choosing the correct label width for your
application.
Heat-shrink Minimum cable
tube size
1/4" (6 mm) 0.05" (1.24 mm)
1/2" (12 mm) 0.12" (3 mm)
1" (24 mm) 0.22" (5.5 mm)
2" (54 mm) 0.46" (11.5 mm)
2 1/8" (54 mm) 0.46" (11.5 mm)
The label properties you can set are:
Label
Landscape (Default)
orientation
Portrait
Changing the label orientation removes any content on the
label, creating a new blank label.
Label length Minimum: 1 1/4" (31.75 mm)
Default: 2" (50.8 mm)
Label outline Yes - Show label outline.
No - Hide label outline. (Default)
Leader/trailer Yes - Blank space is equal at the beginning and end of the label. (Default)
match
No - No blank space added at the end of the label.
This property is only available when using continuous label cartridges.
To create a heat-shrink tube label
From the Home screen, tap
1
Follow the steps to configure your label.
2
Add text and formatting.
3

110-Block Label

The 110-block label is one of several datacom specific labels. You enter data into
one of three pre-defined block formats depending on the block type you select.
One text object is automatically added for each block. Additional text box,
barcode, image, and shape objects cannot be added to 110-block labels.
Text size and style apply to all blocks on the label and all labels in the file. When
Auto fit text is selected for font size, the text is automatically resized to fit that
block. So you may see differences in text size for each block.
Use serialization to automatically populate the blocks. When all the blocks are filled
on the current label, a new label is created. See Creating a Series of Labels on
page 35.
™
19 XTL 500
User Guide
Maximum cable
diameter diameter
0.14" (3.5 mm)
0.28" (7.2 mm)
0.57" (14.50 mm)
1.27" (32.3 mm)
1.27" (32.3 mm)
Heat-Shrink Tube.
Minimum Maximum
AWG AWG
16 7
8 1
3 4/0+
3 4/0+
3 4/0+