Conference; Initiating A Conference; Conference Screen Navigation; Speaking To One Participant In Private - Snom 760 User Manual

snom 760 User Manual

Conference

The maximum number of participants is five (your phone and four others).

Initiating a conference

1. Call the first intended participants and put him or her on hold.
2. Call the next intended participant and put him or her on hold.
Continue likewise with the third and fourth participants, if applicable.
◦
You do not need to put the last participant on hold before starting the conference.
◦
3. Pess to start the conference.

Conference screen navigation

Your input on the phone's keys will affect the caller/callee(s) shown in the contact area of the display.
Example: A conference with four participants, including yourself. After you have pressed
start the conference, the phone numbers of the other three participants are shown on-screen (Fig.
C-1).
Fig. C-1
• Selecting individual participants:
With all participants on-screen (Fig. C-1), press
◦
(Fig. C-2); press
reached the last participant (Fig. C-4).
Scroll back through the participants by pressing
◦
• Bringing the entire conference back on-screen: Scroll to the first participant's screen (Fig. C-2),
then press .

Speaking to one participant in private

1. Put the participant on-screen, as shown in Conference screen navigation, above.
2. Press to put the other participants on hold and talk in private to the participant whose number is
shown on the display.
3. To return to the conference, press
Fig. C-2
again to put the next participant on-screen (Fig. C-3), until you have
and
50
Fig. C-3
to put the first participant on-screen
.
.
Using the Phone
to
Fig. C-4