Din-Rail Mounting - Lantech IES-0008-M12 User Manual

DIN-Rail Mounting

To mount the Ethernet switch to a standards DIN rail, please follow the steps below.
1. Prepare the DIN-rail clip and three screws included.
2. Align the screw holes between the clip and the unit as the figure illustrated.
3. Secure the DIN-rail clip to the unit with the accompanying screws.
4. After you have secured the DIN-rail clip to the unit, position the clip side of the
Ethernet switch directly in front of a standard DIN rail. Make sure the top of the clip
hooks over the top of the DIN rail.
12