Mounting Installation; Din-Rail Mounting - Lantech IPGS-0204DSFP-12V User Manual

Mounting Installation

DIN-Rail Mounting

Assembling the DIN-Rail Clip
The DIN-rail clip is screwed on the industrial switch when out of factory.
If not, please refer to the following steps and figure to secure the
DIN-rail clip on the switch.
1, Use the screws to screw on the DIN-rail clip on the industrial switch.
2, To remove the DIN-rail clip, reverse step 1.
Rear Panel of
the switch
DIN-rail clip
15