Installing The Middle Driven Shaft - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

MIDDLE GEAR

INSTALLING THE MIDDLE DRIVEN SHAFT

1. Install:
• bearing retainer 1
Bearing retainer
80 Nm (8.0 m · kg, 58 ft · lb)
LOCTITE
NOTE:
Attach the ring nut wrench 2.
Ring nut wrench
P/N. YM-38404, 90890-01430
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
retainer, turn it counterclockwise.
2. Install:
• bearing retainer 1
M MMM M MMM M M MMM M
a. Place a rag 2 in the vise.
b. Secure the bearing housing edge in the
vise.
c. Attach the bearing retainer wrench 3.
Bearing retainer wrench
P/N. YM-04128, 90890-04128
d. Tighten the bearing retainer.
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
retainer, turn it counterclockwise.
Bearing retainer
110 Nm (11.0 m · kg, 80 ft · lb)
LOCTITE
L LLL L LLL L L LLL L
4 - 95
ENG
®
M MMM M M MMM M M MMM M MMM
®
L LLL L L LLL L L LLL L LLL