Replacing The Front Brake Pads - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

FRONT AND REAR BRAKES
CAUTION:
Disc brake components rarely require dis-
assembly. DO NOT:
• disassemble components unless abso-
lutely necessary;
• use solvents on internal brake compo-
nents;
• use spent brake fluid for cleaning; (use
only clean brake fluid)
• allow brake fluid to come in contact with
the eyes, as this may cause eye injury;
• splash brake fluid onto painted surfaces
or plastic parts, as this may cause dam-
age;
• disconnect any hydraulic connection, as
this would require the entire brake sys-
tem
cleaned, properly filled and bled after
reassembly.

REPLACING THE FRONT BRAKE PADS

NOTE:
It is not necessary to disassemble the brake
caliper and brake hose to replace the brake
pads.
1. Measure:
• brake pad wear limit a
Out of specification → Replace the brake
pads as a set.
8 - 20
CHAS
to be disassembled,
Brake pad wear limit
1.5 mm (0.06 in)
drained,