Checking The Coolant Level - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

CLEANING THE AIR FILTER/

CHECKING THE COOLANT LEVEL

3 - 18
c. Apply Yamaha foam air filter oil or other
quality foam air filter oil.
d. Squeeze out the excess oil.
NOTE:
The element should be wet but not dripping.
L LLL L LLL L L LLL L L LLL L
6. Install:
• air filter element
• air filter case cover
NOTE:
To prevent air leaks make sure that the sealing
surface of the element matches the sealing
surface of the case.
7. Install:
• console
• passenger seat
• driver seat
Refer to "SEATS, ENCLOSURE, HOOD
AND CARGO BED" in chapter 8.
CHECKING THE COOLANT LEVEL
1. Place the vehicle on a level surface.
2. Lift the hood up.
3. Check:
• coolant level
The coolant level should be between the
minimum level mark a and maximum level
mark b.
Below the minimum level mark → Add the
recommended coolant to the proper level.
CAUTION:
• Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant, check
and if necessary, correct the antifreeze
concentration of the coolant.
• Use only distilled water. However, soft
water may be used if distilled water is not
available.
CHK
ADJ
L LLL L L LLL L LLL