Table of Contents
Advertisement
ADJUSTING THE HEADLIGHT BEAM/
CHANGING THE HEADLIGHT BULB
3 - 51
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• headlight beam (vertically)
Turn the adjuster 1 in or out.
Turning in
Headlight beam raised.
Turning out
Headlight beam lowered.
CHANGING THE HEADLIGHT BULB
1. Lift the hood up.
2. Remove:
• headlight bulb holder cover 1
3. Remove:
• headlight bulb holder (with bulb) 1
• bulb
NOTE:
Remove the defective bulb by unhooking the
headlight bulb holder tabs 2.
WARNING
Keep flammable products and your hands
away from the bulb while it is on, since it
will be hot. Do not touch the bulb until it
cools down.
4. Install:
• bulb
New
Secure the new bulb with the headlight bulb
holder.
CAUTION:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
CHK
ADJ
Advertisement
Table of Contents
Troubleshooting
