Assembling The Rear Brake Caliper - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

New
1
2
New
1
4
3
FRONT AND REAR BRAKES
1
a
1
b
c
3
2
1
8 - 38
EBS00432

ASSEMBLING THE REAR BRAKE CALIPER

WARNING
_
• All internal brake components should be
cleaned and lubricated with new brake
fluid only before installation.
Recommended brake fluid
DOT 4
• Replace the caliper piston seal and dust
seal whenever a brake caliper is disas-
sembled.
1. Install:
• caliper piston seal 1
• dust seal 2
New
2. Install:
• brake caliper piston 1
Turn the brake caliper piston clockwise until
section a of the brake caliper piston is level
with the surface of the brake caliper body.
NOTE:
Align an end b of the groove in the brake cali-
per piston with the punch mark c on the brake
caliper body.
3. Install:
• gasket 1
• parking brake case 2
• parking brake case bolts 3
22 Nm (2.2 m · kg, 16 ft · lb)
• O-ring 4
CHAS
New